UPF600-148 - Digital Power UPF600-148 Power Supply - Medical and ITE Grade 600 Watt Dual Output Power Switcher, Output Current 12.5 A

UPF600-148 - Digital Power UPF600-148 Power Supply - Medical and ITE Grade...

Request Quote
For Price

Part Number:: UPF600-148
Model Number:: UPF600-148
Make:: DIGITAL POWER
Lead Time:: Available
Qty In Stock:: Available

Digital Power UPF600-148 Power Supply - Medical and ITE Grade 600 Watt Dual Output Power Switcher, Output Current 12.5 A Simple Type: Power Supply

The Digital Power Open Frame Series switching power supplies incorporate advanced component and circuit technologies to deliver the smallest 600 watt switchers in the industry. Designed to meet 1U height considerations, the devices’ U-Frame packages measure only 6.80 x 3.86 x 1.50”. Each model offers universal AC input (85–265 VAC) with active power factor correction (PFC), optional 48 VDC input, flexible output configurations, and compliance with worldwide safety and EMC standards.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

350–600 watts
Digital PFC for accurate input power metering and inrush current control for AC and DCsystems
High efficiency operation of up to 90%
I²C interface provides for firmware uploads, status monitoring, and product data retrieval
L x W x H: 6.80 x 3.86 x 1.50” (17.27 x 9.80 x 3.81cm)
Low profile 1U height
O’ring diodes/FETs for redundant operation
Optional 36–72 VDC input range
Power density of 22 W/in.3
Single wire current share
Universal AC input (85–265 VAC) with active PFC for EN6100-3-2 compliance

Specifications

General

AC Fail: ACTIVE low 10 ms before loss of power with internal 3.3V reference voltage
AC Input Voltage: 85–265 VAC wide range
Auxiliary Output: 5 V / 500 mA
Conducted Immunity: EN61000-4-6, 0.15-800 MHz, 10V, 80% AM
Cooling: 300 W free convection cooling, 600 W forced air cooling
Current Share: Single wire, ±10% accuracy
EFT/Bursts: EN61000-4-4, ±1 KV
Electrostatic Discharge: EN61000-4-2, ±4 KV contact / ±8 KV air discharge
Fluctuations & Flicker: EN61000-3-3
Hold-up time: 16 ms @ full load
Humidity: Up to 95% RH non-condensing
Initial Setting Accuracy: ± 0.5% maximum
Input Inrush Current: < 50 A @ 250 VAC cold start
Input Line Protection: 10 A 250 VAC SLO BLOW IEC type
Input Reflected Ripple: FCC 68 part 15 Class B with external line filter
Line Regulation: ± 0.1% for Vin (min.) to Vin (max.)
Load Regulation (V1): ± 0.5% maximum
Load Regulation (V2): ± 5% maximum V3 and V4: ±5% maximum
Min Load Requirement: None
MTBF: >300,000 hours
Operating Temperature: –25°C to 50°C (–13°F to 122°F); De-rate of 2.5% per 1°C to 70°C (34°F to 158°F)
Over-voltage Protection: 120% typical latched shut-down
Overload Protection: Hiccup mode, 110% typical of maximum output load
Power Factor Correction: >0.98 typical @ 110/220 VAC input @ full load
Power OK: ACTIVE low and ACTIVE high with internal 3.3V reference voltage, indicates when main output volage drops more than 10%
Radiated Susceptibility: EN61000-4-3, 80 –1000MHz, 3 V/m, 80% AM
Remote Inhibit: ACTIVE low-output shut down
Remote sense: Compensates for < 500 mV drop
Ripple/noise: 1% p-p maximum
Safety Approvals: IEC/EN/UL/cUL 60950-1 & 60601-1, CE Mark (LVD)
Shock & Vibration: 0.75 G peak 5 Hz – 500 Hz
Storage Temperature: –25°C to 95°C (–13°F to 203°F)
Surges: EN61000-4-5, ±2 KV line-earth, ±1 KV line-line
Temperature Protection: Shutdown (internal heat-sink temp. >95°C/203°F) with auto recovery
Transient response: ±5% max. deviation for load change of 25% to 75% at slew rate of 1A/usec, recovery time to 1% within 500 usec
Turn-on Delay: 1 sec. maximum
Voltage Dips: EN61000-4-11, 30% dip for 10 ms, 60% dip for 100 ms
Voltage Interruptions: EN61000-4-11, 95% reduction for 5,000 ms

Applications

None Available

Aliases

None Available

DIGITAL POWER Industrial Partner