CPCI-DC-6U-500/48 - Digital Power CPCI-DC-6U-500/48 500 W CompactPCI Power Supply; 36-72 VDC...
Request Quote
For Price
- Part Number:
- CPCI-DC-6U-500/48
- Model Number:
- CPCI-DC-6U-500/48
- Make:
- DIGITAL POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
Digital Power CPCI-DC-6U-500/48 500 W CompactPCI Power Supply; 36-72 VDC Input with V1: +5 V/65 A V2: +3.3 V/80 A V3: +12 V/12 A and V4: -12 V/1.5 A DC Outputs. Simple Type: Power Supply
The Digital Power CPCI 6U Series power supplies offer industryleading performance for the Military, Commercial, Telecom and Industries markets, with a full range of AC Input, 24 VDC and 48 VDC input products. The entire range of products are compliant to the PICMG 2.11 power interface speciation and provide from 350-650 Watts of output power. Key features include:
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 24 VDC and 48 VDC input models available
- 350–650 watts
- 6U cabinet
- Active load current share (+5 V and 3.3 V output)
- International regulatory approvals
- O’ring diodes/FETs for N+1 parallel operation
- PICMG 2.11 compliant
- RoHS compliant
- Ruggedized construction
- Universal AC input with PFC
Specifications
- Conducted Immunity: EN61000-4-6, 0.15–800 MHz, 10 V,80% AM
- Cooling: 400–500 W-250LFM/600–650 W
- Current Share: Single wire (V1 and V2)
- DC Fail: Open collector ACTIVE low
- EFT/Bursts: EN61000-4-4, ±2 KV
- Electrostatic Discharge: EN61000-4-2, ±KV contact / ±8KV air discharge
- Emissions: EN55022 Level B
- Fluctuations & Flicker: EN61000-3-3
- Front Panel Green LED: Outputs OK
- Front Panel Red LED: Fault condition
- Hold-up time: 16 ms minimum (full load)
- Humidity: 400–500 W-250LFM/600–650 W
- Initial Setting Accuracy: ±1%
- Input—24 V Input Models: 18–36 VDC Input range
- Input—48 V Input Models: 36–72 VDC Input range
- Input—AC Models: 90–264 VAC, 47–63 Hz
- Inrush Current: <35/65 A @ 110/230 VAC
- Line Regulation: ±0.5% for minimum to maximum voltage input
- Load Regulation: V1 and V2: ±1% maximum V3 and V4: ±5% maximum
- Min Load Requirement: None
- MTBF: >400,000 hours per Belcore 332 issue 6
- Operating Temperature: –5°C to 55°C (23°F to 131°F); De-rate of 2.5% per 1°C to 70°C (34°F to 158°F)
- Over Temperature Warning: Open collector ACTIVE low
- Over-voltage Protection: 110–125% of V1/V2/V3 (latched shutdown)
- Overload Protection: V1 and V2: 125% / V3 and V4: 200%
- Power Factor: >0.90/0.95 typical @ 110/220 VAC (full load)
- Radiated Susceptibility: EN61000-4-3, 26–1000 MHz, 10V/m, 80% AM
- Remote Inhibit: Active Low - Off
- Remote sense: Compensates for < 500 mV drop
- Ripple/noise: V1 and V2: 60 mV, V3 and V4: 120mV (20M Hz bandwidth)
- Safety Approvals: UL/cUL 60950-1, IEC/EN 60950-1
- Shock & Vibration: Up to 95% RH non-condensing
- Storage Temperature: –40°C to 85°C (–40°F to 185°F)
- Surges: EN61000-4-5, ±2 KV line-earth, ±1KV line-line
- Transient response: >0.90/0.95 typical @ 110/220 VAC (full load)
- Turn-on Delay: 2 seconds maximum
- Voltage Dips: EN61000-4-11, 30% dip for 10 ms, 60% Dip for 100 ms
- Voltage Interruptions: EN61000-4-11, 95% reduction, 5 seconds
Applications
- None Available
Aliases
- None Available